How to Read a SPY GEX Heatmap Strike by Strike
Key takeaways
- A net GEX heatmap maps dealer gamma per strike and expiry; bright zones are call walls dealers hedge by selling rallies, dark zones are put walls they hedge by buying dips.
- The gamma flip is the color transition line where dealer hedging shifts from amplifying moves to dampening them, and it acts as your regime line for the session.
- For 0DTE trading, read the same-day expiry column rather than the aggregate, because 0DTE gamma dominates intraday dealer hedging.
- Every wall read needs an invalidation: if SPY closes through a wall with volume, that level is dead and the thesis is wrong.
- Free tools like DSGEX and SharkQuant's demo are enough to learn the method; pay only once you know which features you open every session.
A gex heatmap shows dealer gamma exposure at each strike and expiry: the call wall is the bright zone dealers sell into, the put wall is where they buy, and the gamma flip band marks where hedging behavior reverses. This walkthrough reads a free SPY heatmap strike by strike and turns each color into a concrete intraday or 0DTE decision.
What a net GEX heatmap actually shows
A net GEX heatmap is a grid of dealer positioning: each cell estimates the gamma dealers are long or short at one strike, for one expiry. Rows are strikes, columns are expiries, and color encodes the sign and size of net gamma at that strike-expiry pair. The inputs are exchange-published open interest and volume, refreshed daily by the OCC, which publishes daily volume and open interest reports on its site. Bright cells mark strikes where dealers carry large positive gamma from short calls they must hedge by selling rallies; dark cells mark strikes where short puts force them to buy dips. Because every cell is a strike-expiry pair, the same strike can look supportive in the front week and neutral in the back weeks, which is why reading one column at a time beats staring at the blended number. Get the sign wrong and every hedge-behavior read downstream is wrong too.
Rows are strikes, columns are expiries
Read a column vertically to find where gamma concentrates: call walls at strikes with large positive gamma, put walls at large negative gamma. Read horizontally to see how one strike's exposure decays across expiries, which matters for 0DTE where a single session's column can dominate.
Net GEX vs gross GEX on the heatmap
Gross GEX sums absolute gamma and hides direction; net GEX subtracts puts from calls, so a strike can show heavy activity with near-zero net exposure. For intraday hedging pressure, net is the read that matters. We break the full workflow down in our GEX heatmap guide.
Where to get a free SPY GEX heatmap
Yes. You can read a SPY net GEX heatmap without paying for a terminal, and it's the fastest way to learn strike-by-strike structure before consolidating paid subscriptions.
Free and low-cost options compared
| Tool | Free access | What you get free |
|---|---|---|
| SpotGamma (spotgamma.com) | Limited | Daily SPX/SPY gamma levels, not the full heatmap |
| Unusual Whales (unusualwhales.com) | Limited tier | Flow data with some options positioning |
| DSGEX (dsgex.ai) | Yes | GEX heatmaps focused on dealer positioning |
| SharkQuant (sharkquant.ai) | Demo available | Net GEX heatmap, dealer positioning, 0DTE expiry breakdowns |
Start with the free recorded demo to see the full heatmap layout this walkthrough uses, then cross-check against SpotGamma's free daily levels.
What the free versions leave out
Free tiers typically delay data, hide per-expiry breakdowns, or cap the strikes you can view. For learning the reading method, that's fine. For live 0DTE decisions, delayed GEX is close to useless, which is exactly why you should learn the method on free views first and only pay once you know which features you actually open every session.
How to read the call wall zone on a SPY heatmap
The call wall is the brightest horizontal band above spot, usually the strike with the largest positive gamma across the expiries shown. Dealers are short calls there, so they hedge by selling rallies. As price climbs toward the wall, that selling gets heavier, which is why the zone acts like a lid: moves into it slow down, fade, or roll over.
Why the largest positive gamma strike acts as a lid
Net GEX concentrates where dealers hold the most short-call exposure. Each point higher forces them to sell more delta, capping the move. The strongest lid is the strike with peak positive gamma, not necessarily the highest open interest.
When a call wall breaks instead of holding
If price closes through the wall with volume, dealers flip from selling to buying delta, and the old lid becomes support. Watch whether the band weakens over successive sessions: a shrinking call wall is easier to break. Free heatmaps like DSGEX let you track that decay without paying first. For strike-by-strike reading drills, the SharkQuant academy walks through annotated SPY examples.
How to read the put wall and the negative gamma zone
Put walls as downside magnets and floors
The put wall is the strike with the heaviest put open interest, usually shown as a distinct color band below spot. Dealers are long puts there, so their hedging means selling into declines and buying back on rebounds. That dampens selling pressure and often makes the put wall act as a floor intraday. If SPY trades through it on volume, that hedge unwinds and the floor becomes a target for the next strike down. Annotate the wall and the strikes beneath it before the open; SharkLearn walks through the same exercise with live data.
Negative gamma below the flip: why moves accelerate
Between the put wall and the gamma flip, net GEX turns negative. Dealers hedge by selling as price falls and buying as it rises, which amplifies the move instead of absorbing it. Practically: expect faster, thinner-bid drops in this zone, and treat bounces as suspect until price reclaims the flip. Size accordingly and define your exit before entering, because negative gamma zones punish hesitation.
Finding the gamma flip on the heatmap
The gamma flip is the strike where net GEX crosses from negative to positive as price moves through it. On a heatmap it shows up as the color transition line: below it, the warm/negative zone where dealers are short gamma and hedging amplifies moves; above it, the cool/positive zone where hedging dampens them. Practically, price inside the flip band tends to chop or accelerate; price above it tends to mean-revert toward the call wall.
The color transition line between regimes
Trace the boundary between the negative and positive shading on today's column. That strike is your regime line for the session: long-bias mean reversion above it, momentum and faster stops below it. If the transition sits between two wide color bands rather than at a single strike, treat the whole band as the flip zone.
Flip level vs zero gamma: not always the same strike
Zero gamma is where aggregate gamma equals zero; the flip level is where net positioning flips sign across strikes. On most SPY sessions they land close together, but multi-expiry weighting can split them by a strike or two. Check the expiry breakdown before treating either as your line, and pair every flip read with the invalidation: price accepting on the other side of the level. We log daily flip levels and their conditions at our insights hub.
Reading expiries separately: 0DTE vs the front week
Why 0DTE gamma dominates intraday hedging
An aggregated heatmap blends every expiry into one net GEX number, which hides the expiry that actually drives dealer hedging today. 0DTE contracts carry enormous gamma per dollar of spot movement because time decay compresses everything into hours, and dealers re-hedge those positions minute by minute. A front-week call wall three percent away matters less intraday than a 0DTE call wall a few points away, even if the aggregated chart shows the opposite weighting. If your tool lets you filter by expiry, trade from the 0DTE slice; use the aggregate only for the broader regime.
Pin risk and expiration-day color collapse
On expiry day, color zones collapse as strikes expire worthless and gamma concentrates at max pain. A call wall that held all morning can vanish after 2pm, so treat late-day walls as provisional. This expiry-level granularity is where free aggregated charts fall short, and where paid tools like SpotGamma charge for per-expiry breakdowns in their upper tiers.
A worked example: annotating a SPY heatmap strike by strike
The setup: price between the flip and the call wall
Say SPY opens at 590, the heatmap shows a call wall at 592, a put wall at 585, and the gamma flip band around 588. Price is above the flip, so dealers are short gamma above 588 and long gamma below it. That single line splits your day into two different hedging regimes.
Scenario table: what happens at each level
A rally into 592 puts dealers short calls they must hedge by buying as price rises, which slows the move and often pins it under the wall. A drop through 588 flips dealers into long-gamma hedging: they sell into weakness, which can accelerate the slide toward 585. At the put wall, dealer buying to hedge short puts tends to cushion the tape. Between the walls, with 0DTE volume concentrated near the strike, expect chop and mean reversion rather than trend.
Invalidation conditions for each read
The pin-under-the-call-wall read dies if SPY closes a 5-minute bar above 592 with volume; the put-wall cushion dies on a sustained trade below 585, not a wick. Re-check the heatmap after large morning sweeps, because fresh 0DTE positioning redraws the walls intraday. If your read has no invalidation level, it is not a read, it is a vibe.
How to turn heatmap reads into intraday decisions
Treat each zone as a scenario, not an entry. Above the call wall, dealer hedging caps rallies, so fades need confirmation; below the put wall, pin risk and accelerated selling both live there. The trade trigger is price accepting or rejecting the zone, and the invalidation is simple: if spot closes through a wall with volume, that level is dead and the thesis is wrong. Set your stop at the level, not at a dollar amount.
Pairing the heatmap with flow confirmation
A wall that holds means more when you see the prints behind it. Check sweeps and blocks at that strike on the same expiry before committing size. With 0DTE now a large share of S&P 500 options volume per CBOE's published 0DTE research, same-day flow can flip walls intraday, so re-check GEX after large prints.
When the heatmap is stale or wrong
Delayed gamma data is worthless for same-day decisions. If your feed refreshes on a lag, or open interest hasn't updated from yesterday, the flip level you're trading may not exist. Cross-check two sources or wait for the refresh before sizing up.
Do you still need a paid GEX tool after learning this?
What paid tools add: speed, history, automation
A free heatmap gets you the read; a paid tool gets you the read faster, over more history, without manual work. Three things matter for 0DTE: sub-minute refresh on net GEX, historical heatmaps so you can backtest how SPY behaved at specific gamma flip levels, and automated recalculation when a large sweep shifts dealer positioning mid-session. If you are annotating strikes by hand every morning, you are paying with time instead of dollars.
An honest look at where SharkQuant fits and falls short
SharkQuant pairs dealer positioning, options flow, and AI analysis with each read tied to an invalidation condition, at $29.99-$49.99 for Core/Pro. It covers the intraday workflow this article describes. Where it falls short: no free tier for extended testing, and if your priority is deep historical backtesting or a public API for your own scripts, SpotGamma or Unusual Whales may fit better. If you already pay for a $100+ terminal and only use the GEX heatmap, consolidating to a cheaper tier is worth running the numbers on.
FAQ
Is there a truly free GEX heatmap for SPY, or are free versions just teasers?
DSGEX offers full GEX heatmaps free, and SharkQuant has a demo showing the complete net GEX layout. SpotGamma and Unusual Whales limit free tiers to daily levels or partial flow data. Free views are fine for learning the reading method, but delayed data is close to useless for live 0DTE decisions, so upgrade only once you trade the levels daily.
What does it mean when the net GEX heatmap colors flip intraday?
Large 0DTE sweeps can redraw dealer positioning within a session, shifting walls and the flip level while you trade. When colors flip, your prior read is stale: re-annotate the new call wall, put wall, and flip band, and treat old levels as dead if price has accepted through them on volume. Re-check after big prints.
Which expiry column should I look at for 0DTE trading?
Use the 0DTE column, not the aggregate. Same-day contracts carry enormous gamma per dollar of spot movement, so they dominate intraday dealer hedging even when the blended chart suggests otherwise. The front-week column matters for the broader regime, and a 0DTE wall a few points away usually matters more than a front-week wall three percent out.
Can I calculate net GEX myself in Python instead of using a dashboard?
Yes. Pull exchange-published open interest and volume from the OCC, apply Black-Scholes gamma per contract, weight by dealer positioning assumptions, and net calls against puts per strike. The inputs are free and refreshed daily. The hard part is intraday recalculation when sweeps shift positioning, which is where dashboards save time.
How accurate are call wall and put wall levels as support and resistance?
They are tendencies, not certainties. Walls hold when dealer hedging pressure is intact, and they fail when price closes through on volume, at which point the old lid becomes support or the floor becomes a target. Walls also decay across sessions: a shrinking call wall breaks more easily. Every wall read needs an invalidation level.