Skip to content
SharkQuant
← All articles

Gamma Levels Trading: Blend 0DTE, Weekly, Monthly

8 min read

Key takeaways

  • Blend 0DTE, weekly, and monthly gamma into one composite ladder weighted by dollar gamma per expiry bucket, not by raw gamma.
  • A practical starting blend is 0DTE 0.5-0.6, weekly 0.25-0.3, monthly 0.15-0.2, shifting weight toward monthly on trend days and event breaks.
  • Treat 0DTE weight as a decay schedule: heavy at the open, roughly halved by midday, near zero into the last hour, with the map re-anchoring to the next expiry overnight.
  • Far-dated monthly walls act as hard gates inside your intraday range when hedging horizons stretch, such as post-0DTE roll windows and VIX spikes.
  • Validate by logging every level touch and comparing blended versus single-expiry hold rates; if the composite does not beat both, fix the weights.

Gamma levels trading works best when you stop reading one expiry in isolation and start blending 0DTE, weekly, and monthly gamma into a single composite level set, weighted by dollar gamma per expiry bucket. That composite tells you where dealer hedging pressure actually concentrates intraday, which walls will hold, which will break, and how the whole map shifts as each expiry rolls off.

Why do different expiries show conflicting gamma walls?

A 0DTE gamma wall at 5900 and a monthly wall at 5920 can both be real at the same time. Each expiry is a separate dealer hedge book: market makers hedge the options they're short in that expiry against that expiry's own exposure profile, so the dealer-positioning layer for 0DTE SPX says one thing while the monthly book says another. Reading a single expiry in isolation tells you where hedging pressure sits for that book only, not where price actually meets combined flow. The conflict is information, not noise. When 0DTE and monthly walls diverge, the spread between them shows you which expiry is doing the hedging work as price approaches, and the 0DTE book usually dominates intraday given that 0DTE contracts are roughly half of S&P 500 options volume per Cboe research (Cboe Global Research). For the mechanics of what happens when blended gamma flips sign, see reading the gamma flip.

How do you build a blended gamma map step by step?

Step 1: pull per-expiry gamma by strike

Export the options chain for every expiry you trade: 0DTE, this week's monthly, next monthly, and any quarterly in between. You need call and put open interest and gamma per strike, not just volume. Most GEX tools show only the aggregate; you need the raw per-expiry breakdown to blend anything.

Step 2: convert to dollar gamma

Raw gamma is unitless. Multiply gamma × open interest × contract multiplier × spot² × 0.01 to get dollar gamma, the notional a dealer hedges per 1% move. A 0DTE strike with huge gamma can still be small in dollar terms if OI is thin, and this step is where that becomes visible.

Step 3: bucket and weight

Group strikes into expiry classes and assign weights. A practical starting point, illustrative rather than universal:

Expiry classWeightRationale
0DTE0.60Dealers must hedge it before the close
Weekly (non-0DTE)0.25Decays into 0DTE as it rolls
Monthly/quarterly0.15Slow-moving, structural

Adjust weights by time of day: 0DTE dominance grows toward the close as its gamma accelerates.

Step 4: stack into a composite ladder

For each strike, sum weighted dollar gamma across buckets, then plot the cumulative profile. Call walls sit where positive gamma concentrates; put walls where negative does. The gamma flip is the strike where cumulative gamma crosses zero.

Worked SPY example

Say SPY is at 590. Your 0DTE shows a 590 call wall, the monthly shows a 595 call wall. Weighted: (590 × 0.60) + (595 × 0.40 blended) ≈ 592 as your composite call wall. That 592 level is what price actually pins toward, not either expiry's wall alone. SharkQuant's dealer-positioning layer (https://sharkquant.ai/ai-agents) automates this bucketing and weighting per tick, so the ladder updates as 0DTE gamma accelerates through the session.

How much should 0DTE gamma outweigh monthly gamma intraday?

A workable starting point: 0DTE deserves 50-60% of the composite weight in the first two hours of the session and again inside roughly 50 points of the pin on SPX, while monthly expiries carry 40-50% on trend days or when price sits far from any 0DTE wall. The mechanism behind the weighting is dealer hedging: dealers long gamma sell into strength and buy weakness, which pins price near large strikes, while short gamma forces the opposite chase. SpotGamma's primer on gamma exposure and dealer hedging covers the convention most GEX tools use to compute this.

A starting weighting scheme: try 0DTE 0.5, weekly 0.3, monthly 0.2 for a normal range day, then shift to 0.2/0.3/0.5 once price breaks a blended wall with expanding range and rising volume, since monthly hedgers then dominate the flow. We keep our own decay math for the 0DTE book documented in our 0DTE gamma landscape writeup.

When to override the weights: quad witching, CPI mornings, and the final hour before cash close all inflate 0DTE's real influence beyond any static ratio, so treat the table as a baseline you tune per regime, not a rule.

When do far-dated gamma levels actually matter to intraday price?

Big-strike gravity

Monthly and quarterly gamma concentrates at round-number strikes with heavy open interest, often 50- and 100-point wide on SPX. Those strikes act like gravity wells: dealers hedging a multi-week book buy dips and sell rips near them, so price can stall, pin, or bounce off a level that looks arbitrary on a 0DTE-only chart. If your blended map shows a monthly wall sitting inside your intraday range, treat it as a hard gate, not a suggestion.

Regime conditions that stretch hedging horizons

On most days, 0DTE flow dominates and monthly gamma is background noise. The far-dated book takes over when hedging horizons stretch: post-0DTE roll windows, VIX spikes that force dealers to rebalance longer-dated books, and opex afternoons when the front expiry decays to near zero and the next layer inherits the map. On those days, weight your composite toward the monthly leg or you'll be trading levels nobody is defending. Track how the handoff plays out on https://sharkquant.ai/insights.

What happens to composite gamma levels as an expiry rolls off?

On expiry morning, your blended map is dominated by 0DTE gamma, but that dominance is a decaying asset. As the session progresses, open interest in the front expiry either gets exercised, rolled, or hedged away, so its walls thin out and strike-level pinning weakens into the close. This is the mechanism behind the classic pin: dealer hedging of large front-month open interest suppresses movement near high-gamma strikes, and the effect fades as that exposure is closed out (Avellaneda-Lipzoan paper on dealer hedging and pinning).

Intraday decay of 0DTE gamma

Treat 0DTE weight as a schedule, not a constant: heavy at the open, roughly halved by midday, near zero into the last hour. If your composite shows a wall at 5900 on SPX at 10am, assume it may not hold by 2pm as the bucket bleeds gamma.

The day-after re-anchor

The next session, the map re-anchors to whatever the next expiry bucket is: the weekly, or monthly if you're in opex week. Levels can shift materially overnight, so recompute rather than carrying yesterday's composite forward. We cover re-anchoring workflows in more depth at SharkQuant Academy.

How do you validate that your aggregated gamma levels are working?

Log every level touch

Keep a simple journal: timestamp, level, whether price touched and held (rejection) or broke and closed beyond it. Tag each entry with the regime: net gamma positive or negative, and whether 0DTE dominated the blend. Thirty trades of data beats any backtest you could fake.

Compare blended vs single-expiry hit rates

Run the same log against your 0DTE-only chart and your monthly-only chart. If the composite does not beat both on hold rate, your weights are wrong, not the method. Expect the blend to shine on quiet days and the 0DTE map to win on event days. With 0DTE now a large share of S&P 500 options volume per CBOE, expiry-weighted levels deserve the extra scrutiny.

Where the method breaks down

Gamma levels describe positioning, not causation. They fail around scheduled events, when dealers hedge with futures instead of options, and during fast gamma flips where the map inverts mid-session. Treat hit rate above coin-flip odds as the goal, not certainty.

Which tools support multi-expiry gamma aggregation?

What to look for in a tool

You need four things: per-expiry GEX breakdowns you can see, not just a blended number; control over the weighting between 0DTE, weeklies, and monthlies; a dealer-positioning layer that updates the flip point as the map decays; and flow data so you can confirm whether printed flow is reinforcing or fading a wall. If a tool only shows one aggregate gamma profile, you cannot tell which expiry is driving a level or when it will roll off.

Honest comparison including SharkQuant's gaps

Skylit, DSGEX, Unusual Whales, and Cheddar Flow all approach this differently, and SpotGamma sits adjacent with deeper dealer-positioning research. SharkQuant covers dealer positioning, options flow, and FIN AI, so you can see the key levels, the setup, and what could change it.

Where SharkQuant falls short: it is not built as a dedicated gamma-heatmap workstation, so if your workflow centers on granular per-strike, per-expiry visual blending, Skylit or DSGEX may fit better. Test whether the composite levels you derive match what price actually respects before committing.

FAQ

Can I blend gamma across SPX and SPY in the same map?

Yes, but convert each to dollar gamma first so the two books sit on the same notional scale, then weight them by liquidity. SPX carries far more open interest, so an unblended mix lets SPY strikes disappear. Keep separate ladders per symbol and compare rather than summing strikes across the two.

What is dollar gamma and why use it instead of raw gamma?

Raw gamma is unitless and ignores position size, so a strike with big gamma but thin open interest looks more important than it is. Dollar gamma multiplies gamma by open interest, the contract multiplier, and spot squared, giving the notional dealers actually hedge per 1% move. Blending expiries without that conversion produces weights that reflect nothing real.

How often should I refresh my composite gamma levels during a 0DTE session?

Recompute at least every 30 minutes, and more often after the open and into the final hour, because 0DTE gamma accelerates as expiry approaches and its blend weight shifts. A wall computed at 10am can be gone by 2pm. If your tooling supports it, refresh per tick as the front-expiry book bleeds gamma.

Do I need paid software to do multi-expiry gamma aggregation?

No. You can export chains per expiry, compute dollar gamma in a spreadsheet, and maintain the weighted ladder yourself, which is slow but workable. Paid tools save time on per-tick bucketing and weighting, which matters because the map decays intraday. What you cannot get free is automated refresh, so manual recomputation means coarser levels.

Why did my gamma wall fail with no news out?

Walls describe positioning, not causation, and they decay. The most common cause is that the expiry bucket behind the wall rolled off or its open interest was hedged away, thinning the level mid-session. Other causes: the blend was dominated by an expiry that no longer mattered, or dealers hedged with futures instead of options, which the map cannot see.